Dro-mesh:
Knitted wire mesh for
professional drone defense
- Made in Germany
- ISO 9001-certified
- >60% more stable than plastic nets
The threat posed by drones
is real. The answer is physical.
Unmanned aerial systems – FPV drones, kamikaze drones, smuggling drones – have become a serious security threat to military facilities, critical infrastructure, and sensitive sites. Electronic countermeasures such as jamming systems fail as soon as drones switch to autonomous navigation or wired control.
Dro-mesh relies on what cannot be outmatched: physical impact. The high-strength knitted stainless steel mesh, developed and manufactured by the world’s largest producer of knitted wire mesh, Rhodius KMS in Germany, reliably entangles the rotors of incoming drones and disables them before munitions, contraband, or reconnaissance equipment reach their target. Without electronics. Without signal interference. Without maintenance.
How Dro-mesh stops drones
Physical deactivation in three steps
1
The drone hits the tensioned mesh and becomes entangled in the fine knitted structure.
2
Rotor blades immediately get caught in the mesh openings – propulsion is instantly blocked.
3
The drone loses control and falls in a controlled manner – payload release or detonation is prevented.
Where Dro-mesh provides protection
Dro-mesh has been developed for use in highly sensitive environments
where electronic systems alone do not provide sufficient protection:
Critical infrastructure
Power plants, energy depots, ammunition storage facilities, rocket launch sites – perimeter protection and roof security
Military & armed forces
Armored vehicles, artillery positions, trenches, barracks, field camps – protection against targeted aerial attacks
Airports & hangars
Protection of aircraft and ground personnel from incoming drones and payload drops
Government buildings & embassies
Perimeter and roof protection for representative and security-critical buildings
Prisons & correctional facilities
Prevention of illegal drone deliveries (drugs, weapons, communication devices) into outdoor yards
IT & radar infrastructure
Protection of sensitive systems from physical damage caused by drone crashes or targeted attacks
Mobile units
Deployment on vehicles, convoys, or portable frames – quick to set up and dismantle
Technical specifications
Dro-mesh is manufactured in Germany according to customer specifications. All parameters can be individually configured:
| Material | Stainless steel wire (rustproof, AISI 316L) · 0.15–0.50 mm wire diameter · optional color combination material / camouflage yarn |
| Roll width | 100 mm – 3,000 mm (customized) |
| Roll length | 5 m – 50 m per roll |
| Weight | Up to 80% lighter than conventional welded mesh alternatives |
| Stability | 60% more stable than comparable plastic nets · high tensile strength · resistant to snow loads and extreme wind |
| Porosity | 99% – physical barrier with near-free airflow and optimal visibility |
| Surface |
Plain stainless steel · chemically blackened (camouflage) · paintable · |
| Certification | ISO 9001 accredited · MADE IN GERMANY |
| Mounting |
Stationary structures · mobile frames · armored vehicles · |
Features and benefits at a glance
- Physical barrier – 100% non-electronic
Works independently of jamming, GPS failure, or RF bypassing - >60% stronger than plastic nets
Reliable performance even against fast, heavy FPV drones - Up to 80% lighter than welded mesh
Reduced structural load, simple logistics, and fast deployment - Virtually invisible – discreet appearance
No attention-drawing effect, compatible with camouflage environments - 99% porosity – open visibility conditions
No visual obstruction for personnel, cameras, and sensors - Modular & reusable
Deployment, withdrawal, and reinstallation without material loss - ISO 9001 – MADE IN GERMANY
Tested, documented, reliable – compliant with procurement standards
Top application scenarios in detail
Perimeter protection:
Fences & barriers
Installed around critical infrastructures such as power plants, oil depots, and ammunition and rocket storage facilities, Dro-mesh forms a passive, maintenance-free security layer against low-altitude drone attacks.
Overhead shields
for mobile units
Mounted on armored vehicles, radar systems, artillery positions, and convoys, the mesh protects crews and equipment from targeted FPV drone attacks and payload drops – deployable within minutes.
Lightweight
cage enclosures
Installed as a closed cage, Dro-mesh prevents entry into restricted airspace or protects stationary assets such as radar systems and communication units.
Prisons & correctional facilities
Stretched over outdoor yards and recreational areas, the mesh reliably prevents illegal deliveries by drone. Its nearly invisible structure does not visually disrupt the facility environment.
Last line of defense –
integration into existing systems
Dro-mesh can be seamlessly combined with electronic countermeasures: as a physical fallback layer, it intercepts drones that have already bypassed RF, EMF, or GNSS jamming systems.
Frequently asked questions (FAQ)
Yes. The fine knitted structure made of high-performance stainless steel is designed to entangle fast-rotating rotor systems. The high tensile strength of the mesh prevents penetration even at high impact speeds.
Dro-mesh is specifically designed for retrofitting. It can be attached to existing fences, building structures, vehicles, or simple steel frames – without complex foundation work or the need for on-site specialists.
As a stainless steel mesh, Dro-mesh is fully corrosion-resistant, UV-stable, and resistant to extreme snow loads as well as high wind speeds. It is designed for permanent outdoor use under all climatic conditions.
In most cases, yes. The knitted structure flexibly absorbs impact. Damaged sections can be selectively replaced without having to replace the entire mesh system. This significantly reduces operating costs.
No. The 99% porosity of the mesh ensures that surveillance cameras, radar, and sensor systems can operate without restriction through the mesh. The discreet mesh structure does not create any significant visual interference in standard camera systems.
Dro-mesh is manufactured in Germany under ISO 9001-accredited production standards, thereby meeting the basic requirements of common procurement guidelines. For specific certification or testing requirements, please contact us directly.
Drone threats are individual – and your protective measures should be too. The engineers at GDW Rhodius KMS work with you to develop a customized mesh solution: from initial threat analysis and dimensioning to the delivery of prefabricated panels, roll material, or fully installable kits.
Share your scenario with us – site type, area to be protected, drone class, and installation basis are enough for an initial technical recommendation.
Do you have a specific requirement for Dro-mesh? We have the right solution!
Our knitted wire mesh is tailored to suit virtually any application in professional drone defense. Talk to our experts about its use for your area of operation – direct, fast, and solution-oriented!